HomeBlogOff-grid solarHow we design an off-grid system — the questions that actually matter

How we design an off-grid system — the questions that actually matter

How we design an off-grid system — the questions that actually matter

Garry Williams · Founder, Empowered Offgrid

No two off-grid systems are the same, because no two properties or households are the same. When we sit down to design a system for your site, every question we ask falls into one of two categories: what your site and building can give you, and what your household is going to ask of it. Get both right, and you end up with a system sized properly the first time. Get either wrong, and the gap gets filled by your generator running harder than it should — which costs you more in the long run, not less.

Box one: the site and the building

The first set of questions we ask is about what your property can physically offer. How much genuine sun does the site get, and where do trees or hills sit relative to where your panels would go? What’s your roof orientation, and how much usable roof space is actually available? What sort of panel mounting are you comfortable with — flush to the roofline, tilted for optimum angle, ground-mounted, or on a shed rather than the house itself?

Sometimes a client wants their panels sitting flush against the roofline for the look of the place, rather than angled for the best possible solar capture. We’ll work with that — but if the panels are sitting at a less-than-optimal angle, we compensate by adding more panel capacity to make up the shortfall. That’s a legitimate design choice, as long as it’s made with the trade-off understood upfront, not discovered later in your winter generation figures. It comes down to optimum versus what the site allows.

Box two: the loads — what you’re actually asking the system to power

The second set of questions is entirely about your household. What are you putting into the house? What’s your hot water setup? How are you cooking? How are you planning to heat the place in winter? Do you have a pool, a dishwasher, heated flooring?

Heated flooring is worth calling out specifically, because it’s the classic trap. It’s a genuinely heavy power draw, and it demands the most exactly when your system has the least sun to give it — the middle of winter. If a heated floor system goes into the design without the panel capacity and battery bank sized to match, that gap gets filled by leaning harder on the generator. There’s no way around that trade-off after the fact — the decisions we make together at the design stage are what lock in how hard your generator has to work for the life of the system.

Get either wrong, and the gap gets filled by your generator running harder than it should — which costs you more in the long run, not less.

Lifestyle and occupancy patterns matter as much as headcount

One of the biggest variables in sizing your battery bank isn’t how many people live in the house — it’s when they’re using power. A household that’s out at work all day and comes home in the evening puts almost all of its daily load onto the battery bank overnight, because it isn’t drawing power live off solar generation during the day the way a household working from home would. That pushes your required battery bank size — and cost — up, for exactly the same daily energy use.

It’s genuinely about habits, not headcount. We’ve designed for households of five people using around 11kWh a day, and households of just two people using 25kWh a day. The number of people in your house tells us very little on its own — how and when you’re using power tells us everything.

What happens when the roof runs out before the design does

We’ve designed larger systems — a 22kW, three-phase off-grid setup for a substantial home is a real example — where the available roof space became the binding constraint rather than the household’s power needs. Between the house roof and the shed roof, there wasn’t quite enough surface area to fit the panel array the home’s genuine winter demand called for. The result is a property that has to work harder for its winter generation than it would if roof space had been planned for from the outset — a good illustration of why site and building constraints have to be weighed against load requirements from day one, not treated as an afterthought once the load numbers are locked in.

It's genuinely about habits, not headcount.

The earlier we’re involved, the better the outcome

If you’re planning a new build, the ideal time to bring us in is early — while you’re briefing your architect, or as your council plans are going in, not once the house is finished and the roof is fixed. A common and genuinely sensible sequence on rural and lifestyle properties is to install a first-stage system into a shed early, sized to power the build itself and any early living arrangements, then expand it once the house is finished — adding panels to the house roof, sizing the battery bank up to match the completed household’s real load, with the shed continuing to act as the property’s central power point.

There’s no substitute for that early conversation. There’s no magic ball — once your site’s constraints and your household’s choices are locked in, the trade-offs are locked in with them. The earlier we’re part of that conversation, the more of those trade-offs we can design around, rather than around them.

Frequently asked questions

What information do you need from me before you can design my system?

Two things: what your site can offer (sun exposure, roof space and orientation, tree and terrain shading, and what panel mounting you’re comfortable with), and what your household will ask of it (hot water, cooking, heating, and any heavy loads like a pool or heated flooring). The more detail we have on both, the more accurately we can size your system the first time.

When should I talk to Empowered Offgrid if I’m planning a new build?

As early as possible — ideally while you’re working with your architect, or around the time your council plans go in. Bringing us in early often means we can stage your system sensibly, starting with a shed-based install that powers construction, then expanding once the house is finished.

Does the number of people in my household determine my battery bank size?

Not on its own. When your household uses power matters more than how many people are in it. A household that’s out during the day and home at night puts nearly all its daily use onto the battery bank overnight, which requires a larger battery bank than a household drawing power steadily through daylight hours — even at the same total daily usage.

What’s the biggest mistake people make when planning loads for an off-grid system?

Adding heavy, winter-heavy loads — heated flooring is the standout example — without matching panel and battery capacity. It’s not something we can fix after installation without leaning harder on your generator; it needs to be accounted for at the design stage.

Tell us about your place. We’ll design a system for it.

About the author

Garry Williams founded Empowered Offgrid’s predecessor, Solar Service Centre, in 1991 and has designed off-grid power systems ever since. He lived off-grid at Wootton, NSW for twenty-three years and has more than two hundred and fifty off-grid installations behind him.